XSTRA’S SERVICES RATES & CHARGES EXCLUDING TAXES
Standard Working Hours – Definition Mon to Fri, Non-Public Holidays, between 7:00 am and 7:00 pm Australian Eastern Standard Time (UTC +10 AEST) at the rates shown below
Non-Standard Working Hours – Definition Hours outside of the defined period above are considered non-standard working hours, and Services provided during these times, are billed at twice the rates shown below.
Time – Remote Rate, Technical and Consulting, Per Person $2.50 Per Minute – Minimum 5 Minutes
Time – On-Site Rate, Technical and Consulting, Per Person $150 Per Hour, Minimum 1 Hour
Time – Other Rate, including Standby or Miscellaneous, Per Person $75 Per Hour, Minimum 1 Hour
Travel – Rate Per Vehicle & 1 Person Free up to 25 Kilometers from our office(s), then $2.50 Per Kilometer. Additional Person charged at the Time – Other Rate metric shown above. Travel Distance Calculator
Travel between Client Sites Travel between Client sites, (Site 1 and Site 2), is not billed if the distance is less than 25 kilometers. For distances exceeding 25 kilometers, we will calculate our travel expenses based on two routes: from Site 1 to Site 2, and from our office(s) to Site 2. The client will be charged based on the less expensive of these two calculations. Travel Distance Calculator
Sundry Expenses: including Accommodation, Parking Fees, Transfers, Travel & Meals, Car Hire, Equipment Rental & Other Net Cost + 20% Margin (Net Cost x 1.25)
Restocking Fee Original Net Sell Price less 40% Margin (Net Sell Price * 0.6) (See section 5.3(b) in the Global General Terms and Conditions of Trade )
Freight Charges Net Cost + 40% Margin (Net Cost x 1.67)
Equipment Procurement Service (EPS) Fee Net Cost + 20% Margin (Net Cost x 1.25) or 10% if Monthly Recurring (Net Cost x 1.12)
Client Payment Processing Charges See our Credit Policy

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
https://x.direct/1/en/topic/welcome

Post Comment